Design of Additional Safety Locks for Motor Vehicles Using RFID
Abstract
Indonesia, facing the dual challenges of rapid economic development and rising vehicle theft rates due to economic inequalities, has prompted a need for innovative security solutions in the automotive sector. This research aims to address this growing concern by introducing a sophisticated motor vehicle security system utilizing Radio Frequency Identification (RFID) technology. The proposed system employs RFID keys, which use ID tag cards as unique identifiers to activate motor vehicles. The methodology centers around the integration of RFID technology with a microcontroller, creating a security system that is both advanced and user-friendly. This system includes an alarm feature that is triggered when an ID tag card not registered with the vehicle's RFID is used, providing an additional layer of security against unauthorized access. The results of implementing this system have been promising. Testing revealed that the RFID locks, when combined with the microcontroller, effectively recognized authorized ID tag cards and successfully denied access when unauthorized cards were used. The alarm system also functioned as intended, activating when discrepancies in ID tag data were detected. This integration of RFID with a microcontroller not only enhanced the security of motor vehicles but also contributed to a significant reduction in vehicle thefts in the community, showcasing the potential of RFID technology as a viable solution to the prevalent issue of vehicle security in Indonesia.
Downloads
References
E. Wibowo, "Perencanaan dan strategi pembangunan di Indonesia," Jurnal Ekonomi Dan Kewirausahaan, vol. 8, no. 1, 2008.
T. Sudaryanto and S. H. Susilowati, "Perkembangan ekonomi kakao dunia dan implikasinya bagi Indonesia," in Forum Penelitian Agro Ekonomi, vol. 9, no. 1, pp. 36-45, 1991.
L. Firnando, "Pencurian Kendaraan Bermotor di Wilayah Hukum Kepolisian Sektor Kikim Timur," Palembang, 2022.
E. Rahmawati, M. F. Riyandi, S. H. Prasetyo, M. Farhan, F. Qiram, and N. Nuryadi, "Perancangan Alat Sistem Keamanan Kendaraan Motor Menggunakan RFID Berbasis Arduino Uno," Jurnal Khatulistiwa Informatika, vol. 1, no. 2, pp. 47-51, 2020.
O. K. Saputra and H. Herlinawati, "Rancang Bangun Sistem Keamanan Kendaraan Bermotor Berbasis GPS (Global Positioning System) dan Koneksi Bluetooth," Electrician: Jurnal Rekayasa dan Teknologi Elektro, vol. 11, no. 3, pp. 105-113, 2017.
H. K. P. Akbar, "Rancang Bangun Alat Pengendali Kunci Sepeda Motor Berbasis Arduino Uno," Media Elektrik, vol. 20, no. 1, pp. 2721–9100, 2022.
D. Hidajanto, "Radio Frequency Identification (RFID) dan Aplikasinya," Jurnal Teknik Elektro, vol. 16, no. 1, 2014.
A. Mubarok, I. Sofyan, A. Akbar, Rismayadi, and I. Najiyah, "Sistem Keamanan Rumah Menggunakan RFID, Sensor PIR dan Modul GSM Berbasis Mikrokontroler," Jurnal Informatika, vol. 5, no. 1, 2018.
M. R. Ramadhan, R. K. Lesmana, F. S. Siregar, R. Ridho, M. Hafi, and I. Isnan, "Rancangan Teknologi RFID Gerbang Parkir Pada UINSU Medan," Jurnal Sains Dan Teknologi (JSIT), vol. 3, no. 1, p. 14, 2023, doi: 10.47233/jsit.v3i1.464.
B. Broto Aji and M. Kristian Kelviandy, "Pemanfaatan RFID dalam Sistem Keamanan Motor Berbasis Arduino (Radio Frequency Identification)," Jurnal Pendidikan Tambusai, vol. 7, no. 1, 2023.
U. Ependi, "Pemodelan Sistem Informasi Monitoring Inventory Sekretariat Daerah Kabupaten Musi Banyuasin," Klik-Kumpulan Jurnal Ilmu Komputer, vol. 5, no. 1, pp. 49-60, 2018.
Q. I. Saputri, N. H. Sudibyo, and R. D. Handayani, "Sistem Tracking Pada Jasa Penyewaan Kendaraan Roda Empat Berbasis Internet of Things (IOT)," Teknika, vol. 17, no. 1, 2022.
F. Riandari, P. S. Hasugian, and A. S. Sitio, "PKM: Penyuluhan dan Pelatihan Sistem kerja Otomasi Komputer Kepada Siswa/I di SMA Bayangkari 1 Medan: Penyuluhan dan Pelatihan Sistem kerja Otomasi Komputer Kepada Siswa/I di SMA Bayangkari 1 Medan," TRIDARMA: Pengabdian Kepada Masyarakat (PkM), vol. 2, no. 2, Nopembe, pp. 32-46, 2019.
I. A. Darmawan, "Faktor-Faktor Kegagalan Pemasangan Komponen Chip Pada Papan PCB Menggunakan Mesin Chip Mounter," in Prosiding Seminar Nasional Pendidikan Fisika Untirta, vol. 3, no. 1, Nov. 2020.
I. W. Sukadana and I. M. P. Darma Yuda, "Prototyping PCB Menggunakan Computer-Aided Design," TIERS Information Technology Journal, vol. 2, no. 2, pp. 37–43, Dec. 2021, doi: 10.38043/tiers.v2i2.3310.
Abstract views: 1362 times
Download PDF: 858 times
Copyright (c) 2023 Journal of Information Systems and Informatics
This work is licensed under a Creative Commons Attribution 4.0 International License.
- I certify that I have read, understand and agreed to the Journal of Information Systems and Informatics (Journal-ISI) submission guidelines, policies and submission declaration. Submission already using the provided template.
- I certify that all authors have approved the publication of this and there is no conflict of interest.
- I confirm that the manuscript is the authors' original work and the manuscript has not received prior publication and is not under consideration for publication elsewhere and has not been previously published.
- I confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
- I confirm that the paper now submitted is not copied or plagiarized version of some other published work.
- I declare that I shall not submit the paper for publication in any other Journal or Magazine till the decision is made by journal editors.
- If the paper is finally accepted by the journal for publication, I confirm that I will either publish the paper immediately or withdraw it according to withdrawal policies
- I Agree that the paper published by this journal, I transfer copyright or assign exclusive rights to the publisher (including commercial rights)
_1.png){kind=logo}
